We have Interface use alarms setup and when a port goes into alarm, it doesn’t report the computed threshold but shows the raw speed instead (warning level……);
WARN - [2] (up) MAC: 00:25:45:d7:8f:89, 1 Gbit/s, in: 3.75 Mbit/s(3.8%/100 Mbit/s), out: 89.67 Mbit/s(89.7%/100 Mbit/s**)
(warning level at 10000000.00****)**
We have the rule configured as:
Levels for error rates:
70.010%, 80.100%
Operating speed:
ignore speed
Operational state:
ignore
Assumed input speed:
100 Mbit/s
Assumed output speed:
100 Mbit/s
Measurement unit:
Bits
Used bandwidth (minimum or maximum traffic):
Any ideas why this is not showing the computed speed of 80Mb warn and 90Mb crit, but instead shows the odd number of warning level at 10000000.00**.**
Thanks
Jason
----- DISCLAIMER ----- This email (including any attachments) is confidential and may be subject to solicitor-client privilege. If you are not the intended recipient, you are hereby notified
that any use, distribution or copying of this email is prohibited. If you have received this email in error, please immediately notify me and permanently delete this email. Opinions expressed in this email are those of the sender and not of Toyota. Please scan
this email for viruses. Toyota does not accept any responsibility for problems caused by viruses, regardless of source.
Ce courriel (incluant toutes pièces jointes) est confidentiel et peut être assujetti au privilège du secret professionnel. Si vous n’êtes pas le destinataire visé,
nous vous avisons par la présente qu’il est interdit d’effectuer toute utilisation, toute distribution ou toute copie de ce courriel. Si vous avez reçu ce courriel par erreur, veuillez aviser immédiatement le soussigné et supprimer ce courriel de façon permanente.
Les opinions exprimées dans ce courriel sont celles de l’auteur et non de Toyota. Veuillez vérifier la présence de virus dans ce courriel. Toyota n’accepte aucune responsabilité pour des problèmes causés par les virus informatiques, peu importe la source.
In / Out, Upper, Percentual levels (in relation to port speed), 80.0%, 90.0%